An evaluation is a set of screens that learners work through to give feedback on a program. To see what learners experience and the results you get back, read Evaluations Overview first.
When you build an evaluation, you choose which sections to include, such as Impact, Facilitation or Experience. Then you add questions to each section from the Question Pool. You can build an evaluation as a reusable template, or directly in a single program.
Templates are the quickest way to give many programs the same evaluation. To manage them, navigate to Program Admin, then select Evaluation Templates under Manage Evaluations.
Before you start
- Make sure the questions you need are in the Question Pool. You can also create new questions while you build.
- To include a Learning Objectives section, the program needs learning objectives set up in its program settings.
Templates during the program and follow-up surveys
There are two kinds of evaluation templates:
- During Program Templates are for evaluations completed during or at the end of a program.
- Follow-up Survey Templates are for surveys sent after the program ends, to check how learning has been applied.
Both kinds are built in the same way.

The list shows at a glance which sections each template includes. The Default for column shows which program types start with the template.
How to create a template
- Navigate to Evaluation Templates, then select During Program Templates or Follow-up Survey Templates.
- Select Create template.
- Work through each step in the left menu, starting with Settings.
To edit an existing template, select the three-dot menu beside it, then select Edit.
How to choose settings and sections
The Settings step sets up the evaluation as a whole.
- Enter a Title and Description, and add a Graphic if you'd like one.
- Turn on Allow anonymous responses if learner names shouldn't be attached to their responses.
- Turn on Set as a default for new programs, then tick the program types that should start with this template. If another template is already the default for a type, it's shown beneath that type.
- Under Sections, turn on each section you want to include.
- If you turn on Primary rating, choose a Rating type: NPS, Satisfaction or Pulse Check.

Each section you turn on appears as a step in the left menu.
The sections of an evaluation
- Introduction is the first screen learners see. Use it to set context and say roughly how long the evaluation takes. You can add an optional Estimated completion time.
- Primary rating asks an NPS, Satisfaction or Pulse Check question. Pulse Check uses the same face scale as Anytime Feedback, and is asked first.
- Impact asks about behaviour change and skill application. Add questions from the Impact category of the Question Pool.
- Learning Objectives asks learners to rate how well the program addressed each of its learning objectives. The objectives come from each program, so they're not chosen here.
- Session Feedback asks learners about any sessions they haven't rated yet. The sessions and questions come from each program's own Session Feedback setup.
- Facilitation asks learners to rate each facilitator using the same questions. You can add a "Think about" prompt to guide their answers.
- Experience asks how learners felt about the program's delivery and content.
- Workplace Actions asks learners to commit to new actions, review existing ones, or both. You can set the Minimum required actions and allow learners to add more.
- External link sends learners to an external survey or feedback form.
- Conclusion is the last screen learners see, after they submit.
For each section, you can edit the Screen title and Description that learners see.
Learning Objectives, Session Feedback and Workplace Actions are left out on programs that don't have them set up.
How to add questions to a section
- Select the section in the left menu, such as Experience.
- Select Add Questions.
- Choose Add from Question Pool to pick existing questions, or Create New Question to write a new one.
- Tick the questions you want. Use the search box and type filter to narrow the list, or select View to preview a question.
- Select Add questions.

Each question appears as a card in the section. Labels on each card show its scale and whether it's Shared and Required.

How to manage questions in a section
Select the three-dot menu on a question card to:
- Move Up or Move Down to change the order. You can also drag a question by its handle (the icon next to the three dots).
- Use a copy to make a version that belongs to this evaluation only.
- Make optional or Make required to set whether learners must answer.
- Remove to take the question out of this evaluation. The question stays in the Question Pool.
.png)
Shared questions and copies
Questions marked Shared are linked to the original in the Question Pool. If anyone edits the original, the change applies to every evaluation that uses it.
If you need different wording for one evaluation, select Use a copy. Your changes to the copy won't affect the original or any other evaluation.
How to set up the conclusion screen
The Conclusion step sets what learners see after they submit.
- Enter a Page title and Message. A short, genuine thank you works well.
- To invite testimonials, turn on Invite learners to leave a testimonial. Choose a Minimum rating and enter a Testimonial prompt. Only learners who give a primary rating at or above the minimum are invited.
- To offer a reward, choose who is eligible under Who is eligible. Then enter a Reward message and choose a Discount code.

Offering a reward to everyone who completes the evaluation encourages more responses. Offering it only to people who leave a testimonial encourages advocacy. The testimonial option needs a primary rating in the evaluation.
How to activate a template
New templates are saved as drafts. Only active templates can be added to programs or chosen as defaults.
When the template is ready, change its status from Draft to Active in the left panel of the builder.
How to add an evaluation to a program
- Open the program in Edit view, then navigate to Evaluation & Feedback under Learning Journey.
- Under During the program, select Add evaluation. For a follow-up survey, select Add follow-up survey instead.
- Choose how to add it:
- Add new evaluation to build one from scratch in this program.
- Add from template to start from an active template.
- Copy from program to copy an evaluation from another program.

Adding a template or copying from a program gives this program its own draft copy. You can change it without affecting the template or the other program.
A copy brings across the questions, wording and notification emails. It replaces this program's evaluation reminders with those from the source. Availability isn't copied, so set it in the editor that opens next.
Decide which approach to use before you start. Once a program has an end of program evaluation, you can't copy another one over it.
How to build a new evaluation in a program
When you select Add new evaluation, the evaluation editor opens. It works through these steps in the left menu: Settings, Availability, Introduction, a step for each section you include, Conclusion and Emails & Notifications. Later steps unlock as you complete the earlier ones.
The new evaluation is saved as a draft as soon as you start filling it in. Learners don't see it until you activate it.
Settings
- Enter a Title and Description. Learners see these on their Evaluation page.
- Change the Graphic if you'd like a different icon.
- Turn on Required to complete the program if learners must submit this evaluation before they can complete the program. If the evaluation is open when a learner finishes, their program stays In Progress until they submit it.
- Turn on Allow anonymous responses if learner names shouldn't be attached to their responses.
- Under Sections, turn on each section you want to include. You need at least one section that asks learners something, such as Primary rating or Experience.
- Select Save & Continue.

Availability
The Availability step sets where learners find the evaluation, how they complete it, and how long it stays open.
- Under Learner access, choose where learners find it:
- In the learning journey adds it as an activity in a section, so it opens when that section does. Choose the Screen and Section under Learning Journey Placement. It's added at the bottom of the section, and you can move it later. Until it opens, learners see it as locked on their Evaluation page.
- On the Evaluation screen at the end lists it on the learner's Evaluation page with the program's other evaluations. Choose when it opens under Availability.
- Under How learners complete it, choose Log in to complete it, or Complete it from a link, no login needed. A link lets learners answer straight from the email, which helps once they've stopped visiting the program. Choosing it turns on the Evaluation Now Available email and keeps it on.
- Under Keep survey open, choose when learners can no longer respond: Until the access close date, Until the end date of the program, or Until manually closed.
- Select Save & Continue.

If you choose On the Evaluation screen at the end, the Availability options are:
- Manually released, where learners see it as locked until your team releases it from Deliver › Manage Evaluation.
- At the end of a specific session, After the last session of the program, or At the start of the last session of the program. Tie it to a session when you want learners to answer while it's fresh, or in the room at the last session.
- At a set date and time, which suits programs where everyone finishes together.
- When required learning is complete.

The access close and end dates come from the program's Key Dates, so the evaluation follows them if they change. A required evaluation needs Until manually closed, so no one is left unable to finish. You close it from Deliver › Manage Evaluation, and closing can't be undone.
Introduction, sections and Conclusion
The Introduction, section and Conclusion steps work the same way as in a template. See The sections of an evaluation, How to add questions to a section and How to set up the conclusion screen above.
On the Conclusion step, you need to choose an option under Who is eligible before you continue, even if it's Don't offer a reward.
Emails & Notifications
The Emails & Notifications step sets the emails learners receive about this evaluation.
- Evaluation Now Available is emailed to each learner, with a platform notification, as soon as the evaluation opens for them. It uses the standard template unless you customise it. Turn it off if you plan to tell learners another way.
- Select Add Reminder to send a reminder a set number of days after each learner is notified. Reminders only go to learners who were notified and haven't finished, so they need Evaluation Now Available to be turned on. Adding more than one reminder, spaced 5 to 7 days apart, helps reach learners who miss the first.

Activating the evaluation
When everything is ready, select Save and Activate, or Activate in the left panel. If the evaluation is already open when you activate it, the Evaluation Now Available email goes straight away.
To keep working on it later, select Save & Exit. The evaluation stays a draft on the program's Evaluation & Feedback page.
How to manage a program's evaluations
Once a program has evaluations, the Evaluation & Feedback page lists each one with its status and whether it's required. It also shows the page and section of the learning journey where the evaluation sits, when it's available, which sections it includes, and how many responses it has.
Select the three-dot menu beside an evaluation to:
- Duplicate it, for example to create a similar check-in.
- Archive it, so learners no longer see it.
- Delete it. You can only delete an evaluation that has no responses. If learners have already responded, archive it instead.
To follow how an evaluation is going once learners start responding, switch the program to Deliver and select Manage Evaluation. See Evaluations Overview for more on tracking responses and reading the report.
How to set up ongoing feedback in a program
Ongoing feedback runs throughout the program, alongside your evaluations. There are two kinds: Session Feedback and Anytime Feedback. Both appear under Ongoing feedback at the top of the program's Evaluation & Feedback page.
Select the three-dot menu on either one to:
- Edit Settings to choose what it asks and, for Session Feedback, which sessions it covers.
- Preview to see it the way learners do.
- Archive to stop collecting it.
If ongoing feedback isn't set up yet, select Set up Session Feedback or Set up Anytime Feedback instead.

Session Feedback
Session Feedback asks learners to rate the live sessions they attend. Learners can rate a session from their learning journey, or in an evaluation that includes a Session Feedback section. Each session is only rated once.
- Select the three-dot menu on Collect Session Feedback, then select Edit Settings.
- On the Sessions step, choose All sessions to collect feedback on every session, including sessions added later. Choose Selected sessions to tick only the sessions you want.
- On the Questions step, edit the Screen title and Description that learners see when they rate a session.
- Review the questions, and select Add Questions to add more (see below).

Every rated session is asked the same questions, so you can compare sessions directly. Keep the list short, because a learner catching up on several sessions answers the questions for each one. Once a learner rates a session, the question set is locked so everyone answers the same questions.
Anytime Feedback
Anytime Feedback lets learners tell you how the program is going whenever they like, up to 5 times an hour. Learner names are always attached to Anytime Feedback, so someone can follow up. Learners are told this. If you need anonymous feedback, use an evaluation instead.
- Select the three-dot menu on Anytime Feedback, then select Edit Settings.
- Edit the Screen title and Description that learners see.
- Review the questions, and select Add Questions to add more (see below).

Every response starts with the Pulse Check question, which can't be removed. It's shared across every program so responses can be compared, and you edit it in the Pulse Check category of the Question Pool. Any questions you add are asked after it, in every response.
How to add questions to ongoing feedback
- Select Add Questions below the question list.
- Choose Add from Question Pool to pick existing questions, or Create New Question to write one just for this program.
- If you're creating a question, enter a Question title and Question prompt, choose a Question type, then select Save & Continue.

Questions from the Question Pool are marked Shared. Their menu lets you Use a copy, Make optional or Remove them.

Questions you create here belong to this program only. Their menu lets you Edit them, Make optional or Remove them. You can also select Add to Question Pool to make the question available to other programs.
How to set defaults for new programs
Evaluation Defaults sets which templates new programs start with, based on their program type. Navigate to Program Admin, then select Evaluation Defaults under Manage Evaluations.
- Under Defaults by program type, find the program type.
- Choose a template under During the program and under Follow-up survey. Choose No default if programs of that type shouldn't start with one.
- Turn Session Feedback and Anytime Feedback on or off for each program type.

Only active templates are listed. To use a different one, create or activate it in Evaluation Templates first.
Defaults apply to new programs created with Add Program. They're added as drafts, so learners see nothing until the program team activates them. Programs copied from another program, a program template or a program shell keep the evaluation setup they were copied with. Programs with evaluations turned off in their Experience settings don't get any defaults.
Common questions
Does editing a template change programs that already use it?
No. Each program has its own copy. Editing a template only changes what future copies get.
Why isn't my template available to add to a program?
Only active templates can be added. Open the template and change its status to Active.
Why is the Learning Objectives section missing from a program's evaluation?
The program doesn't have learning objectives set up. Add them in the program's settings, and the section will be included.
Why can't I delete an evaluation?
Evaluations that already have responses can't be deleted. Archive the evaluation instead.
Can I make a question optional for one evaluation only?
Yes. Select the three-dot menu on the question card, then select Make optional. This only affects the evaluation you're editing.